Please note the following when registering for a class:
Length: 30 hours (6 hours/day)
This five-day online course of Bosch Rexroth’s Visual Motion, version 11, software and the PPC hardware for Basic Program and Maintenance provides for familiarization of the PPC-R/P Hardware, single and multi-axes motion control, IndraLogic PLC, and Visual Motion Programming Software Interface. Basic SERCOS™ theory is also covered to explain the method of communication between the PPC-R/P controllers, Servo Drives, HMI systems, and SERCOS™ based IO.
Upon completion of this course, the student will be able to:
Understand SERCOS™ Communications
Cyclic and Non Cyclic Data Channel.
Cyclic Data Rate.
Master Data Telegram.
Master Synchronization Telegram.
SERCOS™ Power up phases.
H1 Display & Display Option Button.
Serial and Ethernet Interfaces.
Onboard 24V IO.
PC104 Plug In Modules.
RECO IO Bus and RECO IO Modules.
RECO Rack Address Switches.
Remote SERCOS™ Coupling Unit and RECO Inline modules.
Electronic Line Shafting.
Visual Motion 11 Software Overview
Commissioning a new Project.
Setting up Drives.
Setting up SERCOS IO Setup.
Setting up Fieldbus Mapper
Position Monitoring Groups
Synchronization, Online, and Offline modes.
Preparing Visual Motion 10 for IndraLogic
Data Transfer Between Visual Motion and IndraLogic
SCP Communication Configuration
Recognize and Manipulate Registers
System Control Registers.
System Status Registers.
Use of Default Registers.
Visual Motion IO Setup
Setting up Drive Based IO
Setting up SERCOS IO
SCP Communication Settings
Visual Motion Registers and IO Set up
Setup of Physical IO Hardware
Getting IO Configuration Automatically through the PLC.
Setting IO Configuration through the PLC.
Assigning Registers to the PLC.
Review of IndraLogic navigation
Setting up Visual Motion 10 Libraries and Targets
Uploading the existing logic.
Downloading the existing logic.
Linking Register bits to a Virtual HMI or Physical IO.
Visual Motion 10 Function blocks
Write and test logic program to control Visual Motion demo unit
Program a single axis motion program using Visual Motion icons.
Program the same single axis motion program using function blocks in IndraLogic.
Program an ELS motion program using Visual Motion icons.
Program the same ELS motion program using function blocks in IndraLogic.
Program a Coordinated motion program using Visual Motion icons.
Event registration $1,675 per participant
For more information please contact us at:
This screen shows you the details for the selected product.
Click the "Add to Cart" button to add this product to your shopping cart. You can enter a quantity larger then 1 to add multiples of this product to your shopping cart.
If the product is full you will see a "Wait List" button. Click this button if you would like to be notified if/when capacity is added. If capacity is increased we will email you. Upon receipt of the increased capacity notification, registration will be on a first-come, first-served basis.
If the product is not ready for purchase you will see a "Notify Me" button. You can click this button if you would like to be notified when this product is ready for purchase.
Some products can only be purchased through our partner. In this case you will see an "External Register" button. Click this button to purchase through our partner's website.